Tooth whitening: current status and prospects.

As a safe, effective, economical, and convenient technique, tooth whitening is one of the most popular treatments for improving tooth discoloration. This review summarizes the theoretical and recent research developments in the classification and mechanisms of tooth discoloration, as well as the principles, agents, effects, and side effects of tooth whitening techniques. The aim is to provide a basis for the clinical treatment of tooth whitening techniques and to suggest possible new ideas for further research. The accepted mechanism of whitening is the redox reaction of oxides in the whitening reagent, and the whitening effect is remarkable. However, side effects such as tooth sensitivity and irritation of gum and other oral soft tissues can still occur. It is recommended that more monitoring be carried out in the clinic to monitor these side effects, and care should be taken to protect the soft tissues in the mouth during office whitening procedures. Furthermore, there is a need to develop new additives or natural whitening products to reduce the occurrence of side effects.

Whitening efficacy of activated charcoal-based products: A single-blind randomized controlled clinical trial.

OBJECTIVE: This randomized controlled clinical trial evaluated the whitening efficacy, tooth sensitivity (TS), and volunteers' satisfaction following the use of activated charcoal powder and toothpaste. METHODS: Fifty-six volunteers were randomly allocated into 4 groups (n = 14) according to a 14-day toothbrushing or whitening treatment with activated charcoal powder (ACPW), activated charcoal toothpaste (ACT), regular fluoridated toothpaste (RT), and 10 % carbamide peroxide (CP). Objective (ΔE00) and subjective (ΔSGU) color and whiteness index (ΔWID) changes were calculated. Patients self-reported the risk and intensity of TS using a visual analogue scale and the volunteer's satisfaction was determined by a questionnaire. Color assessments were analyzed by Kruskal-Wallis followed by Dwas-Steel-Crithlow-Fligner, and absolute TS risk and volunteer's satisfaction by Fisher exact test (p < 0.05). RESULTS: ACPW and ACT promoted similar effects in ΔE00, ΔSGU, and ΔWID to that observed for RT. No significant difference was found in terms of TS risk intensity. TS risk became high after 7 and 14 days, with higher TS prevalence in CP. Volunteers reported that ACPW exhibited the lowest ease-of-use, comfort, and whitening satisfaction among groups (p < 0.05). CONCLUSION: Activated charcoal-based products presented a minor and unsatisfactory whitening effect while CP resulted in optimal tooth whitening and the highest level of satisfaction among volunteers. Risk was higher from 7 days onwards and was more pronounced in the CP. CLINICAL RELEVANCE: Based on the whitening effect and patient satisfaction, this controlled-randomized clinical evidence supports that the use of activated charcoal-based products should be discouraged.

The effect of photobiomodulation therapy associated with casein phosphopeptide-amorphous calcium phosphate fluoride paste on the treatment of posthome whitening tooth sensitivity and color change: A randomized clinical trial.

OBJECTIVE: This study assessed whether combining photobiomodulation therapy (PBMT) with casein phosphopeptide-amorphous calcium phosphate fluoride (CPP-ACPF) paste can effectively reduce post-home whitening tooth sensitivity (TS) without compromising shade change. METHODS: Fifty participants were selected and assigned to one of four groups: (1) PLACEBO group-received a placebo paste and PBMT simulation; (2) PBMT group-received a placebo paste + PBMT; (3) CPP-ACPF group-received CPP-ACPF paste and PBMT simulation; (4) CPP-ACPF + PBMT group-received both CPP-ACPF paste and PBMT. The participants used whitening trays containing 22% carbamide peroxide for 2 h a day for 21 days. TS was measured daily using a visual analog scale, while shade change was assessed using a spectrophotometer: before bleaching treatment (T0), after the first (T1), second (T2), and third (T3) weeks of treatment, and 30 days (T4) after completing the whitening treatment. RESULTS: Intragroup analysis revealed that the PLACEBO group had the highest increase in sensitivity during the whitening treatment. The CPP-ACPF and PBMT groups showed no significant difference tooth whitening (TW) between weeks regarding aesthetic change. The CPP-ACPF and PBMT group exhibited a significant reduction in TS between the first and third and between the second and third weeks TW, but not between the first and second. Conversely, the PLACEBO group showed a higher sensitivity than the other groups (p < .05). The CPP-ACPF and PBMT groups did not differ from each other. Furthermore, the CPP-ACPF and PBMT group showed a greater decrease in sensitivity than the PLACEBO group at T1, T2, and T3 (p < .01), and was significantly differed from CPP-ACPF and PBMT groups only at T2 and T3. All groups confirmed TW effectiveness. Student's and paired t-test did not reveal any significant difference between groups (p > .05). CONCLUSION: Therefore, PBMT associated with CPP-ACPF paste can reduce TS without compromising the efficacy of TW.

Evaluation of at-home bleaching protocol with application on different surfaces: bleaching efficacy and hydrogen peroxide permeability.

Objectives: This study aimed to evaluate the bleaching efficacy and hydrogen peroxide permeability in the pulp chamber by the at-home bleaching gel in protocols applied on different dental surfaces. Materials and Methods: Forty premolars were randomly into 4 groups: control group no bleaching, only application on the buccal surface (OB), only application on the lingual surface (OL) and application in buccal and lingual surfaces, simultaneously (BL). At-home bleaching gel (White Class 7.5%) was used for the procedure. The bleaching efficacy was evaluated with a digital spectrophotometer (color change in CIELAB [ΔE ab] and CIEDE 2000 [ΔE 00] systems and Whitening Index for Dentistry [ΔWID]). The hydrogen peroxide permeability in the pulp chamber (µg/mL) was assessed using UV-Vis spectrophotometry and data were analyzed for a 1-way analysis of variance and Tukey's test (α = 0.05). Results: All groups submitted to bleaching procedure showed bleaching efficacy when measured with ΔE ab and ΔE 00 (p > 0.05). Therefore, when analyzed by ΔWID, a higher bleaching efficacy were observed for the application on the groups OB and BL (p = 0.00003). Similar hydrogen peroxide permeability was found in the pulp chambers of the teeth undergoing different protocols (p > 0.05). Conclusions: The application of bleaching gel exclusively on the OB is sufficient to achieve bleaching efficacy, when compared to BL. Although the OL protocol demonstrated lower bleaching efficacy based on the ΔWID values, it may still be of interest and relevant in certain clinical scenarios based on individual needs, requiring clinical trials to better understand its specificities.

Randomized clinical trial comparing the violet light emitting diode system and other tooth whitening techniques.

AIM: to evaluate, through a clinical trial, the effectiveness and sensitivity of tooth whitening techniques using violet light emitting diodes (LED), comparing with other whitening techniques. METHODOLOGY: 75 patients were selected to undergo tooth whitening, randomly distributed into five different treatment groups: G1 (35% hydrogen peroxide), G2 (35% hydrogen peroxide + Green LED), G3 (35% hydrogen peroxide at 35% + Blue LED), G4 (35% hydrogen peroxide + Violet LED) and G5 (Violet LED). Sensitivity measurement was recorded using the Visual Analogue Scale (VAS) from 0 to 10; tooth color measurement was performed before (T0) and after 30 days of whitening treatment (T1) using Easyshade Advance 4.0 Vita-Wilcos® dental spectrophotometer. Statistical analysis was performed using the Fisher and Kruskal-Wallis exact test at significance level of p < 0.05. RESULTS: the enamel whitening effect was observed in all groups, with significant changes in G1. With regard to sensitivity, no statistically significant differences were found between groups. CONCLUSION: In G5, no participant reported post-whitening sensitivity, suggesting that treatment with violet LED showed the best sensitivity outcomes, changing the enamel color one more tone on the color scale.

Harmonização do sorriso: aliando ortodontia e estética / Smile harmonization: combining orthodontics and aesthetics

Atualmente é evidente a demanda contínua por padrões de beleza, cada vez mais impecáveis, um sorriso alinhado e harmônico com dentes brancos para se sorrir com confiança. O tratamento odontológico interdisciplinar tem como intuito proporcionar uma boa saúde periodontal, restabelecer a estética e a função do sistema estomatognático. Objetivo: apresentar um relato de caso clínico envolvendo harmonização do sorriso como cirurgia plástica periodontal para alinhamento da margem gengival na região anterior e restaurações diretas em resina composta após a finalização do tratamento ortodôntico, evidenciando a importância da abordagem conservadora e multidisciplinar no âmbito do tratamento estético. Relato de caso: Realizamos o tratamento ortodôntico com aparelho autoligado cerâmico para alinhamento do arco dental e intrusão do elemento 13, em sequência executamos um recorte gengival nos elementos 12 e 22, clareamento dental associado após 15 dias, subsequentemente, reanatomização dentária no elemento 44 para que o elemento 13 não voltasse a extruir pela falta de contato oclusal, e por fim, remodelação dental fazendo uso de resina composta nos elementos 12, 21 e 22 devido a manchas de hipocalcificação dental. Conclusão: Contudo, a estética bucal tem a capacidade de possibilitar a melhoria na autoestima, devolvendo à função, proporcionando satisfação e bem-estar ao indivíduo, enaltecendo o sorriso.

Currently, the continuous demand for increasingly impeccable beauty standards is evident, an aligned and harmonic smile with white teeth to smile with confidence. Interdisciplinary dental treatment aims to provide good periodontal health, restore the aesthetics and function of the stomatognathic system. Objective: to present a clinical case report involving smile harmonization as periodontal plastic surgery for aligning the gingival margin in the anterior region and direct composite resin restorations after completion of orthodontic treatment, highlighting the importance of a conservative and multidisciplinary approach in the field of aesthetic treatment . Case report: We performed orthodontic treatment with a self-ligating ceramic appliance for aligning the dental arch and intruding element 13, then performed a gingival cutout on elements 12 and 22, associated tooth whitening after 15 days, subsequently, dental reanatomization on element 44 to that element 13 would not extrude again due to the lack of occlusal contact, and finally, dental remodeling using composite resin in elements 12, 21 and 22 due to dental hypocalcification stains. Conclusion: However, oral aesthetics has the ability to improve self-esteem, returning to function, providing satisfaction and well-being to the individual, enhancing the smile.

Effects of whitening dentifrices on the enamel color, surface roughness, and morphology

The aim of this study was to evaluate the whitening and abrasion effects of dentifrices containing different whitening agents on artificially stained and unstained enamel. 160 human dental enamel discs were distributed into four groups according to the type of dentifrices applied on them (n=40): Group I, non-whitening dentifrice (control group); Group II, dentifrice containing charcoal; Group III, dentifrice containing blue covarine; Group IV, dentifrice containing hydrogen peroxide. Half of the specimens in each group were immersed in coffee solution. Color measurements were evaluated from stained and unstained specimens before and after brushing by a spectrophotometer. The surface roughness of each unstained specimen was analyzed using a profilometer after the brushing and bleaching. The surface of one randomly selected specimen from each group was observed using a scanning electron microscope (SEM). Statistical analysis of the color change was performed using the Kruskal-Wallis test. The one-way ANOVA was used to evaluate surface roughness. Group III provided significantly higher recovery on ΔE00 values than other groups on the unstained enamel (p<0.05). Group IV showed significantly the highest ΔE00 values on stained enamel (p<0.05) and also Group IV showed the highest surface roughness values (p<0.05), SEM revealed a more irregular surface in groups III and IV. It can be stated that dentifrice containing blue covarine is both an effective and a safe way to provide whiter teeth with routine home tooth brushing.

El objetivo de este estudio fue evaluar los efectos de blanqueamiento y abrasión de los dentífricos que contienen diferentes agentes blanqueadores en el esmalte teñido y no teñido artificialmente. Se distribuyeron 160 discos de esmalte dental humano en cuatro grupos según el tipo de dentífrico aplicado sobre ellos (n=40): Grupo I, dentífrico no blanqueador (grupo control); Grupo II, dentífrico que contiene carbón vegetal; Grupo III, dentífrico que contiene azul; Grupo IV, dentífrico que contiene peróxido de hidrógeno. La mitad de los especímenes de cada grupo se sumergieron en una solución de café. Las mediciones de color se evaluaron a partir de especímenes teñidos y no teñidos antes y después del cepillado con un espectrofotómetro. La rugosidad de la superficie de cada muestra sin teñir se analizó utilizando un perfilómetro después del cepillado y del clareamiento. La superficie de un espécimen seleccionado al azar de cada grupo se observó utilizando un microscopio electrónico de barrido (MEB). El análisis estadístico del cambio de color se realizó utilizando la prueba de Kruskal-Wallis. Se utilizó el ANOVA para evaluar la rugosidad de la superficie. El grupo III proporcionó una recuperación significativamente mayor en los valores de ΔE00 que otros grupos en el esmalte no teñido (p<0,05). El Grupo IV mostró significativamente los valores más altos de ΔE00 en el esmalte teñido (p<0.05) y también el Grupo IV mostró los valores más altos de rugosidad superficial (p<0.05), el análisis en MEB reveló una superficie más irregular en los grupos III y IV. Se puede afirmar que el dentífrico que contiene azul es una forma efectiva y segura de proporcionar dientes más claros con el cepillado de rutina en el hogar.

On-Demand Free Radical Release by Laser Irradiation for Photothermal-Thermodynamic Biofilm Inactivation and Tooth Whitening.

Dental diseases associated with biofilm infections and tooth staining affect billions of people worldwide. In this study, we combine photothermal agents (MoS2@BSA nanosheets, MB NSs), a thermolysis free-radical initiator (AIPH), and carbomer gel to develop laser-responsive hydrogel (MBA-CB Gel) for biofilm inactivating and tooth whitening. Under a physiological temperature without laser irradiation, MB NSs can eliminate free radicals generated from the slow decomposition of AIPH due to their antioxidative activity, thereby avoiding potential side effects. A cytotoxicity study indicates that MB NSs can protect mammalian cells from the free radicals released from AIPH without laser irradiation. Upon exposure to laser irradiation, MB NSs promote the rapid decomposition of AIPH to release free radicals by photothermal effect, suggesting their on-demand release ability of free radicals. In vitro experimental results show that the bacteria inactivation efficiency is 99.91% (3.01 log units) for planktonic Streptococcus mutans (S. mutans) and 99.98% (3.83 log units) for planktonic methicillin-resistant Staphylococcus aureus (MRSA) by the mixed solution of MB NSs and AIPH (MBA solution) under 808 nm laser irradiation (1.0 W/cm2, 5 min). For S. mutans biofilms, an MBA solution can inactivate 99.97% (3.63 log units) of the bacteria under similar laser irradiation conditions. Moreover, MBA-CB Gel can whiten an indigo carmine-stained tooth under laser irradiation after 60 min of laser treatment, and the color difference (ΔE) in the teeth of the MBA-CB Gel treatment group was 10.9 times that of the control group. This study demonstrates the potential of MBA-CB Gel as a promising platform for biofilm inactivation and tooth whitening. It is worth noting that, since this study only used stained models of extracted teeth, the research results may not fully reflect the actual clinic situation. Future clinical research needs to further validate these findings.

Treatment Durations and Whitening Outcomes of Different Tooth Whitening Systems.

Background and Objectives: Tooth whitening is a relatively conservative and effective option to treat discolored teeth. However, questions remain whether in-office or at-home tooth whitening products with short treatment durations are as effective and stable as products with longer treatment durations. Materials and Methods: Forty human third molars with intact enamel surfaces were divided into four groups of ten each, subjected to discoloration challenges with coffee for 60 h, and they were treated with four professional tooth whitening systems: two for take-home use-6% hydrogen peroxide for 30 min/d for a total of 7 h in 14 days (HP6), 10% carbamide peroxide for 10 h/d for 140 h in 14 days (CP10), as well as two for in-office use-35% HP for 10 min × 3 (HP35) for a total of 30 min and 40% HP for 20 min × 3 (HP40) for a total of 60 min. Teeth colors were assessed in the CIE L*a*b* color space with a spectrophotometer immediately and six months after whitening treatments. Surface roughness (Sa) for the treated and untreated enamel surfaces of the teeth in all groups were evaluated with a three-dimensional laser scanning microscope after six months. Results: No significant differences were found between HP6 and CP10 groups immediately after whitening (∆E 10.6 ± 1.6 vs. 11.4 ± 1.7, p > 0.05) and at six months after treatments (∆E 9.0 ± 1.9 vs. 9.2 ± 2.5, p > 0.05), or between HP35 and HP40 groups immediately after whitening (∆E 5.9 ± 1.2 vs. 5.3 ± 1.7, p > 0.05) and at six months after treatments (∆E 7.2 ± 1.6 vs. 7.7 ± 1.3, p > 0.05). The two at-home whitening systems achieved significantly better whitening outcomes than the two in-office products immediately after whitening (p < 0.05). However, at six months after treatments, the differences between at-home and in-office treatments had narrowed significantly (p > 0.05). There were no statistically significant differences with respect to the Sa values between the treated and untreated surfaces (p > 0.05). Conclusions: Tooth whitening products in the same product category have similar whitening efficacies, despite significant differences in treatment durations (7 vs. 140 h, and 30 min vs. 60 min, respectively). Take-home products achieved better whitening outcomes than in-office products, but they needed 14 to 280 times longer treatment durations.

Effects of experimental bleaching gels containing co-doped titanium dioxide and niobium pentoxide combined with violet light.

OBJECTIVES: The objective of the study is to evaluate the bleaching potential of 6% hydrogen peroxide (6% HP) gels containing NF_TiO2 or Nb2O5 irradiated with a violet LED light and the effects on enamel mineral content and surface morphology. METHODS: Particles were synthesized, and experimental gels were chemically analyzed by preliminary and accelerated stability tests, pH, and HP decomposition rate. Bovine enamel blocks were treated with 6% HP gels containing (n = 10): 5% NF_TiO2, 5% Nb2O5, 2.5% NF_TiO2 + 2.5% Nb2O5 or without particles (6% HP), irradiated or not with LED, and the control was treated with 35% HP. Color (∆E00) and whitening index (∆WID) variations, surface microhardness (SH), average roughness (∆Ra), Ca-P concentration (EDS), and enamel morphology (SEM) were assessed. Bleaching was performed in 3 sessions of 30 min and 7-day intervals. Data were submitted to two- (pH, decomposition rate, ∆E00, and ∆WID) or three-way ANOVA and Bonferroni (SH), Kruskal-Wallis (∆Ra), and Dunnet tests (α = 0.05). RESULTS: No changes in the gel's color, odor, or translucency were observed. The pH (6 to 6.5) remained stable over time, and light irradiation boosted the HP decomposition rate. NF_TiO2 and Nb2O5-containing gels displayed higher ∆E00 and ΔWID when light-irradiated (p < 0.05). Nb2O5 and Nb2O5 + NF_TiO2 decreased enamel SH (p < 0.05), but no SH changes were found among groups (p > 0.05). No differences among groups were noted in ∆Ra, Ca-P content, and enamel morphology after treatments (p > 0.05). CONCLUSION: Experimental light-irradiated 6% HP gels containing NF_TiO2 or Nb2O5 were chemically stable and exhibited bleaching potential comparable with 35% HP. CLINICAL RELEVANCE: Low-concentrated HP gels containing NF_TiO2 or Nb2O5 and light-irradiated stand as a possible alternative to in-office bleaching.

A Smartphone Application for Personalized Tooth Shade Determination.

Tooth shade determination methods for evaluating the effectiveness of whitening products at home are limited. In this study, an iPhone app for personalized tooth shade determination was developed. While capturing dental photographs in selfie mode before and after whitening, the app can maintain consistent illumination and tooth appearance conditions that affect tooth color measurement. An ambient light sensor was used to standardize the illumination conditions. To maintain consistent tooth appearance conditions determined by appropriately opening the mouth, facial landmark detection, an artificial intelligence technique that estimates key face parts and outlines, was used. The effectiveness of the app in ensuring uniform tooth appearance was investigated through color measurements of the upper incisors of seven participants via photographs captured in succession. The coefficients of variation for incisors L*, a*, and b* were less than 0.0256 (95% CI, 0.0173-0.0338), 0.2748 (0.1596-0.3899), and 0.1053 (0.0078-0.2028), respectively. To examine the feasibility of the app for tooth shade determination, gel whitening after pseudo-staining by coffee and grape juice was performed. Consequently, whitening results were evaluated by monitoring the ∆Eab color difference values (1.3 unit minimum). Although tooth shade determination remains a relative quantification method, the proposed method can support evidence-based selection of whitening products.

The Effect of 10% Carbamide Peroxide Dental Bleaching on the Physical Properties of Invisalign Aligners: An In Vitro Study.

The high aesthetic demands of patients have increased their requests to align their teeth using clear aligners, including Invisalign. Patients also want to have their teeth whitened for the same purpose; the use of Invisalign as a bleaching tray at night has been reported in few studies. However, whether 10% carbamide peroxide affects the physical properties of Invisalign is unknown. Therefore, the objective of this study was to evaluate the effect of 10% carbamide peroxide on the physical properties of Invisalign when used as a bleaching tray at night. Twenty-two unused Invisalign aligners (Santa Clara, CA, USA) were used to prepare 144 specimens to test their tensile strength, hardness, surface roughness, and translucency. The specimens were divided into four groups: a testing group at baseline (TG1), a testing group after application of bleaching material at 37 °C for 2 weeks (TG2), a control group at baseline (CG1), and a control group after immersion in distilled water at 37 °C for 2 weeks (CG2). Statistical analysis was conducted using a paired t-test, Wilcoxon signed rank test, independent samples t-test, and Mann-Whitney test to compare samples in CG2 to CG1, TG2 to TG1, and TG2 to CG2. Statistical analysis showed no statistically significant difference between the groups for all physical properties, except for hardness (p-value < 0.001) and surface roughness (p-value = 0.007 and p-value < 0.001 for the internal and external surface roughness, respectively), which revealed a reduction in hardness values (from 4.43 ± 0.86 N/mm2 to 2.2 ± 0.29 N/mm2) and an increase in surface roughness (from 1.6 ± 0.32 Ra to 1.93 ± 0.28 Ra and from 0.58 ± 0.12 Ra to 0.68 ± 0.13 Ra for the internal and external surface roughness, respectively) after 2 weeks of dental bleaching. Results showed that Invisalign can be used for dental bleaching without excessive distortion or degradation of the aligner material. However, future clinical trials are required to further assess the feasibility of using Invisalign for dental bleaching.

In vitro comparison of natural tooth-whitening remedies and professional tooth-whitening systems.

Background: An increasing number of patients are using natural homemade remedies such as strawberries, banana peels, coconut oil rinse, basil, lemon, activated charcoal, apple cider vinegar, baking soda, and turmeric to obtain whiter teeth. However, studies on these natural whitening products are limited. Aim: To evaluate the effectiveness of different homemade tooth-whitening agents in vitro. Materials and methods: Ninety caries-free extracted anterior and premolar teeth were collected, cleaned, and sectioned at the roots. The teeth were mounted in epoxy resin (buccal surface) and stored in 0.2 % thymol solution, and were treated with one of the following six whitening agents: baking soda, activated charcoal, lemon juice, strawberries, Colgate Optic Whitening toothpaste, and Opalescence 20 % home-bleaching system. The enamel shade in each sample was measured four times using a spectrophotometer. Baseline measurements for ΔE and (L*, a*, b*) were obtained, and the second measurement was obtained after 5 days. The third reading was obtained on the 10th day, and the fourth reading was obtained at the 4th week to measure colour stability. One-way analysis of variance and post-hoc Tukey tests were used for statistical analysis. Results: ΔE measurements showed a significant difference on the 10th day in all groups except the lemon group (P = 0.164), while all groups showed a statistically significant difference at the 4th week. The mean colour change differed remarkably between the first and fourth readings. The highest change was observed in the lemon group (44.0 ± 2.9), closely followed by the Opalescence 20 % and Colgate Optic Whitening toothpaste groups. The lowest change was observed with strawberries (38.2 ± 4.8). ΔE showed a significant difference in all groups except the turmeric group. Conclusion: Statistically significant differences were obtained with baking soda, activated charcoal, strawberries, lemon juice, Colgate Optic Whitening toothpaste, and Opalescence 20%. Further studies are required to evaluate the effects of these agents on surface roughness and colour stability.

Tooth Bleaching: A bibliometric analysis of the top 100 most-cited papers

Abstract This study analyzes the characteristics of the top 100 most-cited papers related to tooth bleaching. A literature search was performed on the Web of Science up to March 2022. The number of citations was cross-matched with the citation count on Scopus and Google Scholar. The following data were collected: number and density of citations; authorship; year and journal of publication; study design and thematic; keywords; institution and country of origin. Spearman's correlation and Poisson regression were used to determine associations between the number of citations and study characteristics. The VOSviewer software was used to generate collaborative network maps for the authors and keywords. The number of citations ranged from 66 to 450. Papers were published between 1981 and 2020. The most frequent study design and topic were laboratory-based studies and 'interaction of the bleaching agent with dental tissues', respectively. Cochran M, Loguercio AD, Matis B, Reis A, and Suliman M were the authors with the highest number of papers. The countries with the most papers were the United States of America (USA) (28%) and Brazil (20%). Indiana University and State University of Ponta Grossa were the institutions with the most papers (6% each). There was a very strong correlation among the number of citations of the three databases. The 100 most-cited papers related to tooth bleaching were mainly published by the USA and Brazil, with laboratory-based studies addressing topics related to the effects of bleaching agents on tooth structure being the most prevalent.

Resumo Este estudo analisa as características dos 100 artigos mais citados relacionados ao clareamento dental. Uma pesquisa bibliográfica foi realizada na Web of Science até março de 2022. O número de citações foi cruzado com a contagem de citações na Scopus e na Google Scholar. Foram coletados os seguintes dados: número e densidade de citações; autoria; ano e periódico de publicação; desenho do estudo e temática; palavras-chave; instituição e país de origem. A correlação de Spearman e a regressão de Poisson foram usadas para determinar associações entre o número de citações e as características do estudo. O software VOSviewer foi utilizado para gerar mapas de rede colaborativa para os autores e palavras-chave. O número de citações variou de 66 a 450. Os artigos foram publicados entre 1981 e 2020. O desenho e o tópico de estudo mais frequentes foram estudos laboratoriais e interação do agente clareador com tecidos dentários, respectivamente. Cochran M, Loguercio AD, Matis B, Reis A e Suliman M foram os autores com maior número de artigos. Os países com mais artigos foram os Estados Unidos da América (EUA) (28%) e o Brasil (20%). A Universidade de Indiana e a Universidade Estadual de Ponta Grossa foram as instituições com mais artigos (6% cada). Houve uma correlação muito forte entre o número de citações das três bases de dados. Os 100 artigos mais citados relacionados ao clareamento dentário foram publicados principalmente pelos EUA e Brasil, sendo os estudos laboratoriais que abordaram tópicos relacionados aos efeitos dos agentes clareadores na estrutura dentária os mais prevalentes.

A Japanese concept of considerations for evaluation of dental materials for tooth bleaching.

Recent advances in bleaching technology, such as bleaching ingredients, have accelerated the development of tooth whitening materials to change the color of natural teeth toward a lighter or whiter shade. Some bleaching materials are used for patients in combination with auxiliary medical devices to activate the bleaching materials by a light or heat source. Bleaching ingredients can be a poisonous and deleterious substance. Some bleaching materials are used in dental offices and the others at home. In clinical development of bleaching materials, appropriate evaluation of safety and efficacy is required according to the intended use. For appropriate and swift approval of the emerging bleaching materials, guideline on evaluation of dental whitening materials was discussed in a commissioned project by the Ministry of Health, Labour and Welfare of Japan for FY2021. Here, we summarize the current principles of the premarketing evaluation of the safety and efficacy.

Effectiveness and abrasiveness of activated charcoal as a whitening agent: A systematic review of in vitro studies.

INTRODUCTION: Tooth whitening is currently one of the most requested treatments to change the color of teeth. There are different types of whitening in the dental office and at home. There are also many whitening agents on the market. Nowadays, the public has shown great interest in a new natural compound: activated charcoal. It has an abrasive effect and it is included in toothpastes to whiten teeth quickly and easily. OBJECTIVES: The main objective of the systematic review is to perform a qualitative synthesis of the available literature on the use of activated charcoal-based toothpaste for tooth whitening. MATERIAL AND METHODS: An electronic search was carried out in PubMed, Web of Science, and Scopus databases. The search included the terms (charcoal-based OR activated charcoal OR charcoal OR soot) AND (toothpaste OR dentifrices OR bleaching OR oral hygiene OR enamel OR teeth). Inclusion criteria were articles that were published in English, that included activated charcoal toothpastes, that assessed the efficacy of activated charcoal bleaching and/or the safety of using activated charcoal toothpastes, that were conducted on humans or extracted teeth regardless of their origin and the year of publication. RESULTS: Out of 208 articles, 11 met the inclusion criteria, the Risk of Bias of the selected studies was determined as medium-high. Regarding the whitening effect, there is a variety of results depending on the study: in some there are no significant differences between the proposed treatments and in others activated charcoal is not the most whitening agent. Regarding the abrasive effect, most studies agree that activated charcoal toothpaste has a higher abrasive potential. CONCLUSION: Toothpastes based on activated charcoal possess a lower whitening effect than other alternatives and can be considered as less safe due to its high abrasive potential.

Effect of the Teeth Whitening Procedure on the Mineral Composition of Oral Fluid.

The basis of modern tooth whitening systems is the use of a whitening gel, which usually contains hydrogen peroxide or carbamide peroxide. The study included 81 patients aged 22 to 35 years with a tooth color A2 and a darker color on the Vita Classic scale. The purpose of our research was to identify a new approach to whitening teeth to improve safety and gentleness. To perform this, we assessed the effect of the tooth whitening procedure on the mineral composition of the oral fluid. A new approach to the teeth whitening procedure was to use a mouth retractor and a tool for aspirating the whitening gel, which we developed. Before the procedure, a protective film-forming aerosol, which included sodium ascorbate, was applied. After the tooth whitening procedure, the enamel was remineralized with a sealing liquid for 14 days. The concentrations of calcium and phosphorus in the oral fluid were determined using a spectrophotometer with a set of reagents (Human). The results obtained indicate that the new approach to the teeth whitening procedure contributed to less pronounced changes in the concentrations of calcium (+29.07, p < 0.001) and phosphorus (-14%, p < 0.001) in the oral fluid immediately after the procedure and in combination with the standard procedure for teeth whitening; immediately after this procedure, the calcium concentration increased by 74.4% (p < 0.001), and the phosphorus concentration decreased by 23.07% (p < 0.001). The use of remineralizing agents led to a faster recovery of the initial levels of calcium and phosphorus in the oral fluid.

Assessment of Color Change, Esthetic Perception, Treatment Satisfaction, and Side Effects Following the Use of Over-the-Counter Whitening Products.

Objectives: The objective of this study was to investigate the efficacy of tooth whitening and the effects on satisfaction with whitening treatment and esthetic self-perception of over-the-counter tooth whitening products. Materials and methods: Fifty-six participants were randomly allocated to three groups based on the whitening product they used (toothpaste, pencil, or a combination of both). In this prospective study, alterations in tooth color were assessed using a spectrophotometer at three distinct time intervals (initial measurement, seven days, and 14 days after commencing the use of the whitening product). Simultaneously, the respondents were given the PIDAQ questionnaire to complete. Patient satisfaction with treatment characteristics (5-point Likert scale), and perception of side effects were assessed at the end of the study. Results: Participants who used the whitening pen either alone or in combination with whitening toothpaste showed significant improvements in tooth color and whiteness index at seven and 14 days compared to those who used whitening toothpaste alone (p≤0.001). No significant differences were found between products in overall satisfaction with treatment, perception of final tooth color, and treatment comfort. Furthermore, with the exception of the psychological influence factor after 14 days (p≤0.001), there were no significant differences in the PIDAQ questionnaire scores between the whitening products at the different time points. However, many respondents (16.6%) reported oral mucosal sensitivity and a higher percentage (27.8%) reported tooth sensitivity during whitening pen application. Conclusion: The combination of whitening toothpaste and whitening pen, as well as the whitening pen alone, showed effective objective color change results, but home whitening procedures did not significantly affect participants' self-perceived satisfaction or psychosocial outcomes depending on the product used.

Influence of Bleaching Agent Containing Bioactive Glass on Color and Microhardness of Bovine Enamel

To try to reduce the deleterious effects of tooth whitening, bioactive materials have been used. Forty enamel/dentin blocks were stained on dark tea and randomly assigned into four groups (n=10): control group (unbleached), HP35 % (35 % hydrogen peroxide), BG45S5 (Bioglass 45S5® incorporated into HP35 %), and BIO (Biosilicate® incorporated into HP35 %). Colorimetric analysis and microhardness evaluation was performed at baseline, 24 hours and 7 days after the final whitening session. Two-way ANOVA for repeated measures and Bonferroni test was used at a significance level of 5 %. All the coordinates (ΔL*, Δa*, Δb*, ΔE00 and WID) showed a difference between the control group and the experimental ones (p0.05), which suggest a color stability over a week. In contrast, after 7 days, the WID showed that control and PH35 % were different than the other groups (p 0.05). The microhardness did not change over time (p>0.05), except for 35 % HP. In conclusion Bioglass 45S5® and Biosilicate® prevented enamel damage without negatively affect the whitening efficacy.

Para intentar reducir los efectos nocivos del aclaramiento dental, se han usado materiales bioactivos. Cuarenta bloques de esmalte/dentina se tiñeron con té oscuro y se asignaron al azar en cuatro grupos (n=10): grupo de control (sin blanquear), HP35% (peróxido de hidrógeno al 35 %), BG45S5 (Bioglass 45S5® incorporado en HP35%) y BIO (Biosilicato® incorporado a HP35%). El análisis colorimétrico y la evaluación de la microdureza se realizaron al inicio del estudio, 24 horas y 7 días después de la última sesión de blanqueamiento. Se utilizó ANOVA de dos vías para medidas repetidas y la prueba de Bonferroni a un nivel de significancia del 5 %. Todas las coordenadas (ΔL*, Δa*, Δb*, ΔE00 y WID) mostraron diferencia entre el grupo control y el experimental (p0.05), lo que sugiere una estabilidad del color durante una semana. En cambio, a los 7 días, el WID mostró que el control y el PH35 % eran diferentes a los demás grupos (p 0.05). La microdureza no cambió con el tiempo (p>0.05), excepto para 35 % HP. En conclusión Bioglass 45S5® y Biosilicate® previnieron el daño del esmalte sin afectar negativamente la eficacia del blanqueamiento.

The influence of hydrogen peroxide concentration on the chemical kinetics of photo-accelerated tooth whitening.

BACKGROUND: The bleaching procedure consists of chemical principles of free radical release that react with chromophores, which results in an amount of energy released in this process. However, the evaluation of the electrical potential generated in these protocols has not yet been thoroughly investigated in the literature. Thus, this study aimed to examine variations in pH, mV, and temperature of different concentrations of hydrogen peroxide in the presence or absence of an intermittent LED/LASER photo acceleration system. METHODS: The study was divided into six groups (n = 9) according to the concentration of hydrogen peroxide (6%, 15%, and 35%), associated or not with the photo acceleration system LED/LASER. We followed the variation of pH, mV, and temperature at 1, 5, 10, 15, and 30 min after gel manipulation. Data were evaluated by two-way ANOVA of repeated measures (α =0.05). RESULTS: pH, mV, and temperature of the groups showed statistical differences both in the light and bleach and in the interaction between the two factors (p < 0.0001), where pH and mV were more influenced by the bleach and light factor, while the temperature was influenced by the bleach factor associated with light. HP15 presented the most significant change in pH, mV, and temperature. CONCLUSION: The use of LED/laser increased the temperature of the gels and altered the pH and mV kinetics of HP6 and HP15, which did not occur in HP35, possibly due to the high ionic potential linked to the concentration.